Skip to Sub Navigation

Main Menu

How to Read Your Electricity Meter

Your meter reading will help us provide you an accurate bill. We use meter readings to bill you for the actual amount of electricity you use (instead of estimating). Outside of self-read areas, most meters are scheduled to be read every second month.

When we cannot access your meter, a meter reading card will be left for you. Use this card to record your meter reading, then submit it online or to our 24-hour phone recording line.

Place cursor over image to enlarge.

Many electricity meters have 4 dials. Meters with 5 dials or digital displays are also common.

The meter number is displayed on your electricity meter. When entering your meter number, do not include the letters MH. Instead, add another zero at the beginning to make a 7-digit number. The above meter shows MH062189, so this meter number would be 0062189.

Dial display:

  1. Draw the exact position of the dials hands of your electricity meter on the blank dials on the meter reading card.
  2. From the position of the dial hands, record the meter reading under the dials. (See example reading shown below.)

graphic of meter dials

Digital display:

  1. Wait for the electricity meter display to show the letters "kWh" along with the reading.
  2. Record the meter reading on the lines under the dials on the meter reading card.

Submit your reading online or phone 204-453-6712 (Winnipeg) or 1-800-652-4490 anytime and follow the prompts to provide your 7-digit meter number (a leading 0 and the 6-digit number found on the front of your electricity meter) and your meter reading.

For assistance, contact your local district office.

Start your new service or stop your current service (electricity and/or natural gas) and change your address at manitobaaddresschange.ca.