Recreation facilities evaluation
Reduce your ice arena and curling rink operating costs by implementing energy efficient measures in your facility.
Submit your completed Facility Survey for Ice Arenas and Curling Rinks (PDF, 631 KB) to:
Commercial Programs - Recreation Facilities
360 Portage Ave. (7)
Winnipeg MB R3C 0G8
We will review your survey and provide an evaluation report that compares your facility's energy use with similar ones in Manitoba. The report also includes suggestions on which measures to implement for potential energy savings.
Low-cost and no-cost tips
There are many ways you can improve the energy efficiency of your recreation facility and reduce your energy costs. We offer a variety of low-cost and no-cost solutions in addition to a selection of Power Smart programs that help you reduce your building's energy consumption.
- Install a setback thermostat and set it to automatically reduce the air temperature by 5°C in heated areas during unoccupied times.
- Replace incandescent bulbs with equivalent compact fluorescent bulbs and replace incandescent exit signs with LED equivalents.
- Change any linear fluorescent light fixtures that use T12 lamps and magnetic ballasts to T8 lamps, electronic ballasts, and silver or polished aluminum reflectors.
- Replace the temperature sensor that measures the temperature on the brine loop return line with an ice temperature sensor. Cycle the brine pump based on the ice temperature.
- Install low-flow showerheads and shower control push buttons.
- Install occupancy sensors to control lights in low traffic areas, washrooms, and change rooms.
- Caulk and weather strip your facility's walls, floors, windows, roof, and doors. Seal air leaks and insulate water heaters and pipes in unconditioned areas.
- Change air filters on ventilation and heating equipment regularly.
- Shave the ice to maintain 2.5 cm of ice thickness. The amount of power required to keep ice frozen increases incrementally based on its thickness.
- Our Water & Energy Saver Program offers free upgrades to help you conserve and save.
- Our Commercial Kitchen Appliances Program offers free energy efficient pre-rinse spray valves to help your facility save water and energy.
- Turn the lights off when they are not needed and keep them off for extended periods of time. Ensure outdoor lights are turned off during daylight hours.
- Post the rink's monthly utility bill on a bulletin board and encourage employees to take steps to conserve resources.
- Consider giving your staff benefits and creating a bonus structure based on finding and implementing ways to reduce utility bills.
- Clean the concrete and level the sand before making ice. Mark a 2.5 cm line on the rink boards to help maintain ideal ice thickness.
Tips to reduce your rink's electrical demand charges
Monthly electrical demand charges are based on the average peak electrical use recorded during any 15 minute interval that exceeds 50 kilovolt-amperes during the billing period. In almost all artificial ice rinks electrical demand is high enough that the rink must pay electrical demand charges.
- To avoid demand charges, do not start the refrigeration compressors until the meter has been read and do not run the compressors during shutdown season.
- Using one refrigeration compressor at a time in cold weather can result in significant savings to your demand charges and overall electrical use.
- For rinks with artificial ice, add power factor correction to help reduce the peak electrical demand.
- Minimize the use of non-essential electrical equipment, such as drink coolers, refrigerators, and freezers during the start-up period.
- Choose the highest efficiency (called premium efficiency) motors when replacing electrical motors on the ice plant and brine pump.
- Install demand-limiting equipment and controls that sense when a new demand peak is approaching and immediately warns building operators or automatically shuts off non-critical loads.
For more information, contact us.